How To Install Window Blinds In Fort Myers

Countless Fort Myers homeowners choose window blinds when they need more privacy and control over daylight in their properties. They’re a practical and budget-friendly window covering. Experienced do-it-yourselfers can also attach them in a handful of steps. But, nothing is better than hiring an expert window treatment installer. Here are the fundamental steps of putting up window blinds and when to contact the pros to handle it for you.

Measure And Mark Everything Exactly

Before you begin, decide if you want inside-mount blinds or outside-mount. This crucial bit of info will help you see where to measure. Take measurements of the height, depth, and width within your frame for inside-mount installations. When attaching outside-mount blinds, find the height and width of your window, counting the trim, and then lengthen your measurements by three inches to make sure you get adequate coverage. Measure precisely–avoid rounding up or down. Ill-fitting blinds will fail to operate smoothly.

Order Your Blinds

After you have your dimensions, you are ready to choose your blinds. You may already know what kind of blinds you would like. Pick blinds that match your measurements as closely as possible. Ready-made blinds often won’t fit perfectly, either extending out too much or not meeting the edge of the window entirely. Make sure you are provided hardware that lets your blinds install at the right depth, also. You should order specially made blinds and parts for a perfect fit.

Install Your Window Blinds

Your blinds may have instructions. Adhere to them to install your specific product. If you wish to have a glimpse of how challenging it is to install window blinds in Fort Myers, here is a summary of common steps to provide a general idea.

 

Inside Mount Blinds

 

1. Place a bracket on the top of the window’s frame approximately an inch from the side. Ensure this spot won’t obstruct the blind’s operation. Utilize a pencil to designate the bracket holes.
2. Drill pilot holes in the proper spots.
3. Align the bracket with your pilot holes and drill in the screws.
4. Redo the opening three steps for the other bracket.
5. Pop the end caps onto the top rail of your blinds. Fit the headrail into the brackets.

Attach the tilt wand and try it out. In addition, try out the pull cord.

Outside Mount Blinds

1. Figure out if you’re mounting on the wall around the window or the trim. Hold up the headrail and make sure the blind covers the bottom edge of the window.
2. Mark each end of the headrail.
3. Measure four inches from both headrail marks and mark here for the screws.
4. Drill pilot holes in the proper spots.
5. Line up the bracket openings with the drilled holes and secure with screws.
6. Fit the top rail into the brackets.

Attach the tilt wand and test out everything to make sure it works.

Opt For The Easiest Way To Install Blinds 

Just a reminder, you don’t have to do blinds yourself. The simplest way to install window blinds in Fort Myers is to employ a trusted window treatment installer. They will work with you every step of the way. They’ll help you find blinds that match your needs and preferences, make precise measurements for a custom-made product, and attach them for you. They guide customers daily, so they’ll handle your job quickly and precisely. They will remedy any challenges without spending hours looking for help on websites. A window treatment installer will also offer a higher quality of blinds than large retail outlets or online marketplaces.

Save Yourself The Trouble And Have Sunburst Shutters Install Your Window Blinds In Fort Myers

Upgrading to new window blinds in Fort Myers couldn’t be more effortless when you consult with Sunburst Shutters Fort Myers. We’ll help you choose made-to-order blinds that will fit your windows perfectly, and our professional installation crew will affix them for you. All you need to do is dial 239-208-6577 or fill out the form on this page to arrange a free in-home consultation.